Showing 29 results for Design
Rashid Heidarimoghadam, Mehrane Shabani, Younes Lotfi, Fakhradin Ghasemi, Younes Mohammadi,
Volume 6, Issue 2 (9-2018)
Abstract
Introduction: One of the factors affecting carpal tunnel syndrome (CTS) is the lack of coordination and appropriateness of these tools. Designing a handy tool helps with a better performance, befitting and less fatigue. In this study, anthropometric data on the hands (right and left) of women and men were collected.
Materials & Methods: This research was descriptive and 576 people participated in this study; 10 anthropometric measurements of the hand according to the principles of measurement of Pheasant were measured by digital caliper under the same conditions. The measured anthropometric dimensions were the length of the hands and palms, the width of the hands and palms, the length of the fingers (m1-m2-m3-m4-m5) and the maximum power grip. Descriptive indices such as percentile 5, 50 and 95, maximum and minimum, mean and standard deviation were calculated using SPSS software.
Results: 290 women and 286 men participated in this study. Mean and standard deviation of age was (40.58 ± 9.95), height (1.66 ± 1.14) and BMI (26.85 ± 4.50). 90.8% were right handed and (9.2%) were left handed. The mean difference in length of hand, palm length, hand width, thumb length, middle finger length, small finger length, maximum power grip of women and men were statistically significant (P<0.01). All dimensions of the hand in men were larger than women.
Conclusion: Anthropometric dimensions are influenced by factors such as gender, age, genetics, and even type of nutrition, occupation, and other factors. The size of the dimensions of the hands of women and men are different. Anthropometric database of two communities should be used to design handheld devices that are commonly used by both women and men. The findings can be used to design and redesign any hand tools and improve the convenience of users.
Bahram Ipaki,
Volume 6, Issue 3 (10-2018)
Abstract
Background and Objectives: Parkinson’s is a progressive disease of the nervous system that by affecting the body movements, affects patients’ quality of life and makes daily tasks like eating, difficult and time consuming for them. The aim of this study was to improve the comfort situation of Parkinson patient when eating by identifying ergonomic problems, and designing product for this.
Methods: 12 Parkinson’s patients were chosen by simple random sampling method. Data was collected through a translated Interview of the Discomfort Questionnaire section of ErgoFellow Software and direct observation of patients while eating. After the final data analysis and extraction of design guidelines, design ideas were sketched and the final design was formed after AHP evaluation.
Results: Discomfort Questionnaire data (the average rate of 10.6out of 7 (1. 514)) showed that the non-ergonomic posture of hands, fingers, wrists, arms, elbows, neck, upper back (lumber), and shoulders, the discomfort rate while eating, is more intense, compared to other parts of the body . Observations have also shown that in order to near food to patient mouth, occur Non-ergonomic changes in the patient’s posture. Therefore, designing product should be done using anthropometric data.
Conclusion: The results showed that reduction of mouth-to-food distance would reduce discomfort and fatigue for the Parkinson’s patient. Therefore, using anthropometric data, a height-adjustable product was designed and developed that improves the position of the posture and reduces the patient’s discomfort situation during eating food.
Bahram Ipaki, Zahra Merrikhpour,
Volume 6, Issue 3 (10-2018)
Abstract
Background and Objectives: One of the important points in user-centric design is to pay attention to the physical and psychological conditions of the user and the errors caused by the product’s undesirable design. The bicycle shifting system is one of the most complex components that many interactions of users with it have an effect on them. This research recognizes the exact needs of cyclists and provides a solution to create effective user interaction.
Methods: In this research, using a combination method, a qualitative analysis was carried out using the AEIOU method, 50 cyclists of the Tabriz Islamic Art University were selected using non-random sampling method. Using a desirability testing of 3 subjects, a quantitative survey was done. After the preparation of the design requirements, by using SCAMPER technique, ideas were evaluated through DFV technique and the final idea was developed.
Results: The results showed that users are faced with more psychological than physical problems during a gear shift. According to the desirability testing, the subject (2) with a score of 883, and the ratio of desirability of 1.212 compared to the subject (3) and 1.256 compared to the subject (1), was the most desirable product, which indicates the direct relation of the utility rate with the simplicity.
Conclusion: Since most users’ mistakes in understanding the logical displacement of the gears lead to poor bike switching conditions, the design of the product focuses on reducing user error and the number of additional operations and accelerating the user decision making process.
Mehdi Ganji, Milad Karimi, Behnoush Bahari,
Volume 6, Issue 4 (3-2019)
Abstract
Background and Objectives: Due to the necessity of the proper driver packaging, setting parameters for the driver to achieve the highest ergonomics of the driver has a great importance. The range of variations in some parameters of the package is wide, and the correct selection of the packaging parameters until to achieve driver’s ergonomics position, requires some tests.
Methods: In this study, using the MINITAB16 software and using these parameters, several driving simulation were performed using the DHM (Digital human modeling) and DOE (Design of experiment) tools. Hence, for the C segment vehicles, the range of all driver’s package parameters, such as seat height, steering angle etc., was extracted using the A2MAC1 site, and was considered as the basis for the input parameter. According to the proposed tests by MINITAB16 software, the driver’s comfort level was evaluated based on the PORTER (1998) criteria.
Results: The seat height and also vertical and horizontal distances of the steering wheel to the accelerator heel point have the greatest impact on the driver’s ergonomics. Also, due to the high correlation between some of the parameters of the package and the ergonomics outputs of the body while driving, predictive equations were presented in this regard.
Conclusion: The results are the optimal model for ergonomic driving position. The most influential parameters of the driver’s package are ergonomically known and using the ANOVA (Analysis of variance), mathematical predictor models were presented.
Rahmkhoda Javadi, Mohsen Rasouli, Jafar Hasani,
Volume 7, Issue 1 (5-2019)
Abstract
Background and Objectives: Quality of work life is one of the most important factors in promotion of teachers and having them continue their jobs. This study aimed at designing and evaluating a questionnaire for teachers’ work life quality.
Methods: In this research, a sequential exploratory approach (instrument editing model) was used and in the qualitative stage, a semi-structured interview method was used to determine the quality of life of teachers. In the qualitative stage, indices of work life quality were identified using semi-structured interviews with 12 teachers (9 men and 3 women) of Karaj city (2014-2015 educational year) selected through purposive sampling method. The qualitative data was analyzed using Straus and Corbin method. Subsequently, a questionnaire of teachers’ working life quality was constructed based on these indices and was validiated in the quantitative stage.
Results: Content validity was confirmed by five experts using content validity index. A sample of 760 (387women) teachers selected through multistage cluster sampling were handed out two questionnaires including a researcher-made questionnaire of teachers quality of working life and Walton (1973) quality of work life questionnaire. Construct validity of the research-made questionnaire was examined using exploratory factor analysis. Eight factors were extracted and confirmed through confirmatory factor analysis. Fit indices of model indicate compliance. Convergent validity was confirmed by its correlation with the quality of work life questionnaire (P<0.01). Reliability was confirmed by calculating Cronbach’s alpha coefficient (0/74-0/88).
Conclusion: The results of the study indicated that the researcher-made questionnaire with regard to its design in the job context of Iranian teachers, with 54 items, is an appropriate tool for assessing the quality of their working life.
Ahmad Baleshzar, Meymanat Tabodi, Zahra Rojhani Shirazi,
Volume 7, Issue 2 (9-2019)
Abstract
Background and Objectives: Design of work environment is one of the factors that can affect performance and efficiency of employees. Human’s productivity has different dimensions that may be affected by environmental factors and internal factors such as demographic characteristics. Therefore, this study was designed to investigate the relationship between environmental and demographic factors with productivity of employees of Azad University of Shiraz.
Methods: In this cross-sectional study, out of 360 (all of the employees of Islamic Azad University, Shiraz branch)186 subjects were selected as a sample through convenience sampling. The data collection tools were demographic information questionnaire, Physical Work Environment questionnaire and Hersey-Goldsmith’s productivity questionnaire. Pearson correlation coefficient was used to measure the relationship between quantitative variables with productivity separately. Multiple linear regression analysis was used to examine the relationship between demographic and environmental variables.
Results: The results showed that there was a significant relationship between the factors of work environment design (furniture, noise, temperature, lighting and spatial arrangements). Also, there was a significant relationship between the levels of education with productivity score, so that people with a PhD level had a higher level of productivity than the participants with lower education. Also, the simultaneous relationship of demographic and environmental factors with productivity was significant for spatial arrangements.
Conclusion: The proper design of the work environment is related to employees’ productivity of Islamic Azad University of Shiraz. This can be affected by the demographic characteristics of individuals. However, the simultaneous effect of both factors with productivity showed that spatial arrangements has a considerable effects on productivity.
Mohammad Ghofrani, Majid Motamedzade, Mohammad Reza Aghaie, Zahra Mohammad Moradi,
Volume 7, Issue 3 (11-2019)
Abstract
Background and Objectives: The statics and actions of people during daily activities plays a major role in the physical and mental health and dynamics of the community. Given that humans deal with different things in a day, it is necessary that they are adapted to his features of body. The main goal of this study is to design and construct tables and ergonomic chairs for cartography, in accordance with the physical dimensions of students.
Methods: In this research, one of the most used educational furniture, namely cartographic table and chairs, has been studied. After examining the satisfaction of this furniture, for ergonomic review and design in accordance with anthropometric dimensions, physical features of 160 students of art and 40 students of a technical and vocational school were measured. Then data was analyzed by SPSS 18 software.
Results: According to the results, about 70 percent of the students did not feel comfortable with the features of former chair and table, except for the length of the thigh. There was no significant difference between the different educational foundations in the vocational schools and finally, with the help of tonality features, the drawing table and chair were designed which except for the height of the sitting space, in other indices, there was a 100% correlation with the dimensions of the student's body.
Conclusion: In this study, there was a lot of dissatisfaction among students due to the lack of matching these educational materials with their physical dimensions which has caused physical, mental and psychological damage and poor quality of education. At the end of the study, through ergonomic design, matters of satisfaction, sustainability and reduced production costs and also the reasons for students' dissatisfaction with the drawing table and chairs is presented.
Siavash Etemadi Nejad, Seyyed Esmail Hosseininejad, Jamshid Yazdani Charati, Fariba Ghaempanah, Mahmoud Yousefi Chemazkati, Mojtaba Ahmadi, Ali Amani,
Volume 7, Issue 4 (2-2020)
Abstract
Background and Objectives: Sewing is one of the occupations where the prevalence of musculoskeletal disorders is high. Sewing conditions at the workstation have made tailors face musculoskeletal injuries in various areas of their body, particularly pain in the neck, shoulder, and upper back and even waist. The purpose of this study was to evaluate the effect of a workstation designed for tailoring considering the results of previous studies on the neck and shoulder muscles of users by electromyography.
Methods: In this interventional analytical study, the activity levels of four superficial neck and shoulder muscles (meridian, anterior deltoid, middle deltoid, posterior deltoid) were Electromyographed on 33 participants (male and female) at two new and custom designed workstations.
Results: There was a significant difference in the amount of muscle activity in the new and existing workstations (P<0.05). But there was no significant difference between the different modes of the new workstation.
Conclusion: All four muscles were less active at the new workstation than the conventional workstation, meaning that the designed workstation was able to reduce neck and shoulder muscle activity during work.
Farin Khanehshenas, Peymaneh Habibi, Seyed Abolfazl Zakerian,
Volume 7, Issue 4 (2-2020)
Abstract
Background and Aims: Ergonomics is associated with the study and systematic design of the workplace to improve human health and well-being. The health and well-being of employees are influenced by a variety of factors. Nature is a new paradigm in occupational ergonomics that has not been well explored in the main texts of ergonomics in relation to human well-being. Therefore, the main purpose of this study was to investigate the results of joining with nature on staff health, especially well-being in the form of a systematic review study.
Methods: By searching articles published from 2000 to 2019 in the field of Biophilic design, 25 articles were selected for the present systematic study based on the research criteria. Non-English language articles excluded.
Results: The results of this study showed that Biophilic design is associated with improved human well-being, performance, concentration and stress reduction.
Conclusion: Organizations, with the help of ergonomists, should consider such changes in the workplace, and nature-based solutions as strategic programs for improving well-being rather than merely applying a temporary strategy that changes the physical condition of a building or its landscape.
Mohammad Sadegh Sohrabi, Mehrdad Anbarian,
Volume 7, Issue 4 (2-2020)
Abstract
Background and Objectives: Using anthropometric characteristics in the ergonomic design of workstations can be useful in the prevention and reduction of musculoskeletal discomfort and in office-work environments. The purpose of this study was to determine the anthropometric dimensions of Hormozgan province gas department staff to design desks and chairs for computer work based workstations.
Methods: This is a descriptive-analytical study for measuring 36 anthropometric variables of 121 Hormozgan province gas company staff selected by cluster random method. After collecting anthropometric data considering ergonomic design criteria, dimensions of desk and office chairs are designed.
Results: Participants were 80.2% male and 19.8% female with a mean age of 35.11 and a standard deviation of 6.6 between 25 and 59 years. The mean and standard deviation of height measured was 170.7 and 8.06 cm, respectively. Anthropometric results are shown separately by gender and percentile in the tables. Dimensions of chair and office desk are designed based on obtained data.
Conclusion: The presented anthropometric desks can be used in future studies and designs. Also, the dimensional characteristics of the furniture provided can be a practical guide for designing and manufacturing office workstations.
Mohammad Amin Mououdi, Seyedeh Fatemeh Razzaghi Pahnehkolai, Fariba Qhaempanah, Amirhossein Mahdavi, Ahmad Reza Veisi,
Volume 8, Issue 2 (6-2020)
Abstract
Background and Aim: Two toilets in sitting-type and squatting-type (Traditional) are currently used by Iranian People. Since each of these two types has its own disadvantages and merits, this research aims to design a squatting-type toilet based on ergonomic principles to eliminate its disadvantages.
Methods: 61 subjects (29 males and 32 females) aged 19-60 years were enrolled in this study. Seven anthropometric characteristics were measured using a tape measure with an accuracy of one millimeter in these subjects. A questionnaire containing 4 questions was given to them. Each person was squatting for 2 minutes on different slopes from 0 to 20 degrees. Assessment of Localized Postural Discomfort (LPD) by asking people at 3 points of body, at different slopes, and goniometry in the areas of (A), (B) ,(C) and (D) was also performed.
Results: Based on the anthropometric characteristics of the individuals, LPD and goniometry findings in different areas of the body and dimensions of toilet in the sole position, length 32.33 and width 12.74 cm was obtained. The angle between the soles of the feet was 23.33 degrees and the required slope of the soles was 12 degrees.
Conclusion: The findings of this study suggest that modification of the sole position in squatting-type toilet and its sloping design can be effective in making users comfortable. Given the small number of studies on this type of toilet, further studies in this area, including research on specific populations such as the disabled people, children, pregnant women, the elderly, etc., are necessary.
Fakhradin Ghasemi, Maedeh Hasini, Mojtaba Ahmadi, Mostafa Rahmiani-Iranshahi,
Volume 8, Issue 4 (1-2021)
Abstract
Background and Objectives: Designing workstations in accordance with anthropometric characteristics of employees can prevent awkward working postures and reduce the risk of such disorders. The present study aimed at investigating the anthropometric compatibility of workstations in a sewing company and its relationship with working postures.
Methods: This cross-sectional study was conducted in a sewing company located in Hamadan province, Iran. Working postures were assessed in standing and sitting workstations using REBA and NERPA techniques, respectively. Anthropometric dimensions were measured in accordance with ISO 7250 and anthropometric compatibility with workstation was investigated. Mann-Whitney test was used for assessing the relationship between anthropometric compatibility and working posture.
Results: A total of 205 employees with a mean age 31.29 years participated in this study. Working postures were mostly in an unacceptable condition and the need for ergonomic intervention was evident. In sitting workstation, there was no significant relationship between working postures and anthropometric compatibility in terms of seat depth, seat width, and backrest height. In contrast, anthropometric compatibility with seat height and desk height were significantly associated with working posture (P<0.05). In standing workstations, a significant relationship was observed between anthropometric compatibility and desk height (P<0.05).
Conclusion: Anthropometric incompatibility with workstation generally deteriorated the working postures. However, anthropometric compatibility with seat height and desk height were the ones with a significant relationship with working posture. Therefore, for redesigning workstations the seat height and desk height should be considered first.
Mrs. Ramesh Taherian Ojaroud, Dr. Ali Faraji,
Volume 9, Issue 3 (12-2021)
Abstract
Background and Objectives: The jewelry industry accounts for a large share of the income of the people and the government. Workbench and chair are the main tool for manufacturers, designers, art students and repairmen in this field as a group of users for the efficiency of making jewelry. This research seeks to design a workbench and chair for making jewelry that, in addition to being modular, is also interactive and ergonomic.
Methods: This research is practical as well as qualitative-descriptive in nature. It has used a survey method to collect data in which its most important tools in the practical were verbal-visual (questionnaire, interview) and non-verbal (observation). Its design method was the so-call Design up (Tarrahi Nameh in Persian) which has based on interaction design and a user-centered approach. One of the most useful techniques called the hierarchical analysis process (AHP) has been employed to prioritize users and selected designs.
Results: The result of this research is a modular, interactive and ergonomic workbench and chair under the Mosavvab brand. Their users have the advantage of an independent design resulting from its modularity, benefit from usability as well as engagement user experience due to its interactivity and finally, they satisfy from its safety and comfort due to its ergonomics.
Conclusion: This achievement eliminates tangible and intangible problems and not only provides users with personal satisfaction but also reduces the need for many medical treatments. Six elements of usability such as effectiveness, efficiency, safety/comfort, utility, easy to learn and ease to memory, on the one hand, would be brought. The goals of interaction design as visibility, feedback, constraints, consistency, affordance and engaging user experience, on the other hand, would be illustrated.
Fakhradin Ghasemi, Rashid Heidarimoghadam, Payam Khanlari,
Volume 9, Issue 3 (12-2021)
Abstract
Background and Objectives: Hospital and medical staff use medical gloves to protect themselves and their patients from infectious agents. Wearing gloves may reduce manual dexterity and grip strength and interfere with work performance. The aim of this study was to investigate the effect of wearing medical gloves on grip strength, manual dexterity, and perceived comfort.
Methods: 20 people (10 women, 10 men) participated in this study. Participants were tested in three gloveless modes, with latex gloves and with nitrile gloves with two tests, a 9-hole pegboard and a modified pegboard. Perceived comfort in working with gloves, wearing and removing gloves was also assessed using a subjective scale.
Results: The age range of participants was 20 to 40 years with an average of 29.45 years. There was a significant difference in manual dexterity between gloveless hands and nitrile gloves in the 9-hole pegboard test. In the modified pegboard test, gloveless hand manual dexterity was significantly different from both latex and nitrile gloves. The results also showed that wearing any type of glove significantly reduced the grip strength of individuals. The worst comfort rating was given to wearing gloves.
Conclusion: The results of this study showed that wearing gloves reduces manual dexterity and grip strength. A modified pegboard test is also recommended to assess the manual dexterity of medical gloves. Latex and Nitrile gloves are difficult to wear and should be considered in designs.
Solmaz Tabe-Afshar, Sahar Toofan, Arash Saghafi-Asl,
Volume 9, Issue 4 (3-2022)
Abstract
Background and Objectives: Workplace architecture is one of the most important factors influencing employees' health and wellbeing. Therefore, it is necessary to study the role of workplace design on the emergence of various types of health problems among employees. The present research aims to study the prevailing conditions at the case studied workplaces and to identify the role of factors influenced by interior layout (location-ergonomics, lighting, indoor air quality (IAQ), temperature, noise, design style, and cleaning) on the emergence of Sick Building Syndrome among employees.
Methods: In the present study, three administration buildings (roads and urban development office, construction engineering organization, and airport) in Urmia, Tabriz are investigated as case studies and a total of 226 employees working in these buildings are selected as samples. Then, they are asked to fill out a questionnaire to collect the required data. The reliability of the questionnaire is confirmed using Cronbach's alpha coefficient.
Results: The findings indicate that despite the advantages of open plan layout for the organization of work environments, it still has many negative consequences such as too much noise and distraction, lack of ergonomics, congestion, reduced privacy, and the lack of personal control of environmental conditions. In general, it is not considered an efficient layout design for the workplace.
Conclusion: The results indicate that to effectively deal with the emergence of sick building syndrome and provide a healthy work environment, it is necessary to establish a balance between various parts in the workplace layout design including private office space, shared workplace, and/or open plan according to the nature and type of work while taking into account the factors and parameters influenced by the layout design and environmental properties.
Mahsa Niknezhad, Ali Faraji,
Volume 10, Issue 3 (12-2022)
Abstract
Objectives: Healthy air is free of any pollutants, including odors, harmful gasses, dust and viruses, especially corona. This healthy air is provided by a purifier device. One of the problems of metropolises is the lack of healthy air, which is one of the most important human needs. The aim of this study was to design a new home air purifier with interactive and ergonomic features.
Methods: The purpose and nature of this research are applied and qualitative-descriptive, respectively. A survey method is used to collect data. The most important tool in the field study is verbal-visual (researcher-made questionnaire) and has benefited from the analysis of relevant experts, Delphi group. Its design method was the so-called Design up (Tarrahi Nameh in Persian) where it is based on the interaction design and user-centered approach and Analytical Hierarchy Process (AHP) is used to evaluate the different stages of the project.
Results: The achievement of this research is a new home air purifier with interactive and ergonomic features with Nik mark. On the one hand, it is easy to use and accelerates the purification operation with a larger area than the existing devices through different filters, and on the other hand, it is easy to assemble, economical and optimally designed. It has automatic and manual adjustment of fan speed and remote control, it has the ability to be used standing and wall-mounted, and it is environmentally friendly.
Conclusion: Eventually this design offered effectiveness, efficiency, safety/comfortability, utility, learnability and memorability as elements of usability. It also demonstrates features such as visibility, feedback, constraints, adaptability and affordance as the goals of interaction design. Finally, this design conducted a satisfactory user experience.
Leila Sadat Razavi Manesh, Kamal Azam, Seyed Abolfazl Zakerian, Payam Khanlari,
Volume 11, Issue 3 (12-2023)
Abstract
Objectives: Signs and symbols are used to inform how different tools work. Considering that washing machines are a widely used device and tool in today's life, the present study was conducted to determine the level of comprehension of “Saraye-Irani” visitors regarding the symbols placed on Iranian washing machines.
Methods: The number of 300 people who referred to "Seraye-Irani" located in Qom city participated in this study. A researcher-made checklist based on the ISO 9186-1 2007 standard was used to collect the required data. After the checklist was approved by the experts, it was distributed among the participants and they were asked to write down the meaning of each symbol in front of it. The gathered data were analyzed in SPSS version 22 software using the Chi-square and Fisher's tests.
Results: The results showed that the symbol of "wrinkle-free washing" with a comprehension rate of 70% was the only symbol that the participants had a good comprehension of. However, the participants' comprehension of the other 13 symbols in question was below the standard level. The understanding of symbols of "extra rinse" (P=0.016), "cold water wash" (P=0.037), "child lock" (P=0.001), and "full power wash" (P=0.044) decreased with increasing age. Moreover, individuals with higher education levels had a better understanding of symbols (P=0.001).
Conclusion: Among the 14 symbols measured in the present study, only one symbol had an acceptable level of comprehension. Therefore, according to the widespread use of washing machines, to optimize the use of this tool, it seems necessary to design and implement the necessary training to familiarize and understand these symbols.
Mahdi Ganji, Milad Karimi, Behnoush Bahari,
Volume 12, Issue 4 (2-2025)
Abstract
Objectives: Nowadays, using digital displays in vehicles has become very common. Therefore, the reflection display screen issue as a virtual image on the vehicle's side windows at night is a controversial item in the ergonomics position of the designed display. Given the high importance of visual tasks, it is necessary to consider ergonomics considerations during vehicle design to achieve an optimal display position.
Methods: In the current study, by identifying the factors affecting the placement of the central display inside the vehicle and assigning level values for them, using the design of experiment statistical method with the full factorial approach, 243 runs were obtained from the combination of the identified factors using MINITAB (version 18) software. By implementing all the extracted runs, the amount of reflection from the central display on the side windows was subjected to statistical analysis of variance (ANOVA).
Results: Significantly effective factors (including their interactions) on the response of the reflection of the virtual image on the critical vision zone and the total reflection on the driver's right and left side windows were identified. In addition, the amount/direction of the factors' effect on the responses was analyzed using a linear regression model.
Conclusion: During the interior design process of the vehicle and display packaging, the factors identified in this study can be used as a control tool to reduce or eliminate the concern of the amount of display reflection on the side windows to prevent driver's ergonomics problems during nighttime driving.
Mr Mahdi Roknian, Mr Jafar Salehian, Payam Khanlari,
Volume 13, Issue 1 (5-2025)
Abstract
Background and Objectives: Firearms, including pistols and rifles, are complex tools with military, sporting, and personal applications that require attention to ergonomics to optimize their design and functionality. This study aims to review existing research on the ergonomic features of firearms, with a particular focus on assault rifles.
Methods: This study employed a scoping review method to examine the ergonomics of firearms. Searches were conducted in the PubMed, Web of Science, and Scopus databases using keywords related to the ergonomic design of firearms. Relevant articles were selected from the collected studies, and data were extracted and reviewed by two authors, with results categorized based on common areas.
Results: A total of 3,121 studies were found through searches in databases, and after removing duplicates and reviewing titles and abstracts, 121 studies were downloaded and assessed based on inclusion criteria. Ultimately, 9 studies entered the final stage. The topics examined in the articles that impact the ergonomics of firearms included anthropometric considerations and human digital modeling, rifle configurations and design features, postural stability, safety, and training.
Conclusion: The ergonomic design of firearms has a significant impact on user performance, safety, and overall experience. Future design efforts should emphasize human-centered approaches, taking into account anthropometric data, firearm configuration, user stability, and safety mechanisms for the production of firearms.
Payam Heydari, Avin Ahmadian, Aram Mohamadi, Pakhshan Ahmadian, Seyyed Ehsan Samaei,
Volume 13, Issue 1 (5-2025)
Abstract
Introduction: Today, visual comfort is considered an important and fundamental component of man-made environments. Therefore, it is necessary to pay special attention to all factors affecting it. This study was conducted as a systematic review to summarize the factors affecting visual comfort.
Methods: An electronic search was conducted in national and international databases including Web of Science, Scopus, Google Scholar, Medline, PubMed, Wiley Online Library, BMJ Learning, Springer and ProQuest. Articles were searched using keywords such as visual comfort, architectural features, space configuration, interior design, physical factors, and lighting.
Results: Out of 135 articles, the full text of 19 articles was finally reviewed. Questionnaires were used in 53.5% of studies, while device measurement were used in 21.4%. Physical factors were found to have the most impact on visual comfort, accounting for 51.4% of the studies reviewed. Additionally, architectural factors, space configuration and interior design accounted for 25.7% of the impact on visual comfort in the studies reviewed.
Discussion and Conclusion: Improving visual comfort can be achieved by influencing factors such as physical elements, architectural design, space configuration, and interior design. This can lead to a reduction in errors, improved performance, decreased injuries from falls, and an overall increase in quality of life.
